Classical Three-Tier Column Cascading Fountain with Illuminated Sphere
Model D-047
Gallery
Specifications
| Model | D-047 |
|---|---|
| Size | W56 × D56 × H91 cm |
| Material | Cast poly-resin with a natural sandstone-look finish (mould-formed) |
| CBM | 0.33 m³ |
| Qty / Carton | 1 pc/carton |
Product Description
A freestanding three-level cascading fountain sculpture featuring three round basins supported by fluted classical columns. Water flows from an illuminated textured sphere at the top through two spouts into the lower basins.
Style & Features
European classical style with Roman-inspired fluted columns, acanthus-leaf reliefs, scroll details, and a stepped square pedestal. The staggered basin arrangement creates a dynamic cascading-water effect, while warm internal lighting and the glowing top sphere enhance nighttime ambience. The light stone-colored finish gives it a sculptural appearance.
Applications
Suitable for gardens, courtyards, patios, villa entrances, hotel lobbies, restaurants, clubs, conservatories, and landscaped commercial spaces. Place it on a flat, stable surface near a waterproof electrical outlet, with adequate clearance around the base for viewing and maintenance.
Common Markets
Commonly used in Europe, North America, Australia, the Middle East, and Southeast Asia, especially in markets favoring classical European-style garden décor.
Frequently Asked Questions
Product & Ordering FAQs
What are the physical dimensions of the D-047 fountain?
Model D-047 measures W56 × D56 × H91 cm.
How is the D-047 fountain packed for shipping?
This model is packed with 1 pc/carton. Each carton has a volume of 0.33 m³.
Do the models in this catalogue come from existing moulds?
Yes. Every model in this catalogue already has its own production mould, so a standard order starts at casting and demoulding, followed by assembly and repair, testing, colouring and packing.
What changes if we need a custom design instead of a catalogue model?
A custom design starts with a master model, made either by 3D printing or by a sculptor. Once the design and the master model are approved, a separate production mould is made before casting begins; the remaining steps are the same as for a catalogue model. This route is quoted as a custom design requiring a new production mould, not as production without a mould.
What information do you need to prepare a quotation?
Please send the model number, the quantity required, the delivery country, any change of size or customization you need, the project schedule, and drawings where applicable.
Does a garden fountain come with a pump and lighting?
Yes. A water pump, lighting and pipework are included.
Selection & Project FAQs
Which outdoor environments is this cascading fountain designed for?
It is suitable for commercial and hospitality areas such as dining terraces, garden lounges, central courtyards, arcade courtyards, garden walkways, and reception gardens. For residential properties, it can be installed in front yards, backyard gardens, and terrace patios.
How should the D-047 fountain be positioned on-site?
This model has a single-sided viewing orientation, so the cascading spouts and illuminated sphere should face the main pathway or seating view. Position it on a flat, stable stone or concrete pad in a courtyard, patio corner, or along a garden border near a weatherproof electrical outlet.
What are your garden fountains made of?
All catalogue models are cast poly-resin with a natural sandstone-look finish, formed in production moulds. They are not natural sandstone, marble, bronze or travertine.
What does the site need before a fountain is installed?
Place the fountain on a firm, level, water-resistant surface near a power supply, with sufficient clearance for viewing, maintenance and splash control.
How is a fountain maintained once it is running?
Regularly clean the reservoir, pipework and pump inlet, maintain an appropriate water level, and disconnect electrical power before maintenance. Periodically inspect the surface, connections and stability; the maintenance interval depends on the installation environment.
Application Scenes
The D-047 three-tier column fountain with its illuminated sphere stands free on the flags at the open corner of the terrace where the awnings end, clear of the parapet on both sides. Two B-033 planters sit along the parapet behind it, low and much smaller in frame. Two I-026SY lanterns sit on the parapet cap further along.
The D-047 three-tier column fountain with its illuminated sphere stands free on the open square of stone paving, clear of both walls and of the pergola, with the border wrapping behind it. Two I-029 openwork vase sculptures stand at the border edge, smaller and further back. Two B-033 planters sit against the rendered wall, clearly secondary.
Application visualisations built from real catalogue models. These are not delivered project references.
Project quotation
Request a quote for model D-047
Tell us whether you need this existing catalogue model, a custom design requiring a new production mould, or help choosing the right route. Include your quantity, destination country and project requirements.
Request a Project Quote