Illuminated Openwork Vine-and-Leaf Vase Garden Sculpture
Model I-029
Gallery
Specifications
| Model | I-029LSYI-029MSYI-029VSY |
|---|---|
| Size | I-029LSY: W63 × D63 × H161 cmI-029MSY: W51 × D51 × H131 cmI-029VSY: W42 × D42 × H100 cm |
| Material | Cast poly-resin with a natural sandstone-look finish (mould-formed) |
| CBM | I-029LSY: 0.76 m³I-029MSY: 0.42 m³I-029VSY: 0.22 m³ |
| Qty / Carton | 1 pc/carton for each model |
Product Description
A series of three illuminated, vase-shaped garden sculptures with openwork climbing-vine and leaf motifs. Warm internal lighting shines through the cutouts. It has no water outlet, basin, or circulation system; it is a decorative illuminated sculptures rather than a functional fountains.
Style & Features
Nature-inspired decorative style with a tall amphora-like silhouette, narrow neck, rounded body, square pedestal base, and dense openwork branches and leaves. The warm backlighting creates pronounced light-and-shadow patterns and a soft, elegant nighttime ambience. Available in large, medium, and small coordinated versions.
Applications
Suitable for hotel and resort entrances, villa courtyards, garden paths, patios, landscape plazas, restaurants, clubhouses, and indoor lobbies. Best placed on a level, stable base near entrances, along walkways, beside planting beds, or as a freestanding nighttime focal point; outdoor electrical connections should be weatherproof.
Common Markets
Commonly suitable for markets in China, Southeast Asia, the Middle East, Europe, North America, and Australia, especially regions favoring illuminated garden ornaments and resort landscaping.
Frequently Asked Questions
Product & Ordering FAQs
How is the I-029 sculpture packaged for delivery?
Each size variant is packed at 1 pc/carton. The carton volume varies by size: I-029LSY requires 0.76 m³, I-029MSY uses 0.42 m³, and I-029VSY takes 0.22 m³.
Do the models in this catalogue come from existing moulds?
Yes. Every model in this catalogue already has its own production mould, so a standard order starts at casting and demoulding, followed by assembly and repair, testing, colouring and packing.
What changes if we need a custom design instead of a catalogue model?
A custom design starts with a master model, made either by 3D printing or by a sculptor. Once the design and the master model are approved, a separate production mould is made before casting begins; the remaining steps are the same as for a catalogue model. This route is quoted as a custom design requiring a new production mould, not as production without a mould.
What information do you need to prepare a quotation?
Please send the model number, the quantity required, the delivery country, any change of size or customization you need, the project schedule, and drawings where applicable.
What is supplied with an illuminated garden feature?
Illuminated models have built-in lighting. The exact components supplied with an illuminated model are confirmed at quotation.
Selection & Project FAQs
Which outdoor settings are suitable for this illuminated decorative accent?
This landscape feature is suitable for commercial and residential outdoor settings. It is often placed along a hotel-resort/garden-walkway, near a clubhouse-restaurant/entrance-forecourt, or within a residential-villa/backyard-garden.
Does this openwork vase sculpture require a backing wall?
No, it is a four-sided piece designed for freestanding installation. It should be installed on a level, stable concrete or paved pad along walkways, within garden beds, or near architectural entrances, and must be connected to a weatherproof outdoor electrical supply.
What are your landscape features made of?
All catalogue models are cast poly-resin with a natural sandstone-look finish, formed in production moulds. They are not natural sandstone, marble, bronze or travertine.
Does a landscape feature need a power supply?
Illuminated models need a power supply within reach. Non-electrical models such as balustrade sections only need a firm, level, load-bearing surface.
How is a landscape feature maintained?
Clean the surface with clean water and a soft cloth without using strong acids, strong alkalis or abrasive cleaners. Periodically inspect the surface, connections and stability; the maintenance interval depends on the installation environment. Disconnect electrical power before maintaining an illuminated model.
Application Scenes
The D-399a relief fountain stands hard against the tall rendered boundary wall that closes the far end of the pool, flat back to the render, on the pool axis so it reflects the full length of the water. Two E-320 relief panels are mounted mirrored on the same wall either side of it, flush to the render and much smaller in frame. One I-029 vase sculpture light stands in the raised bed at the wall foot.
The D-017 lady statue fountain closes the far end of the pool axis, standing with its back to the clipped cypress hedge, water falling through its tiers. Two H-256 pedestals stand back against the hedge on either side with their flat backs to it, lower and smaller. One I-029 vase sculpture light stands at the deck edge, well off axis.
The D-047 three-tier column fountain with its illuminated sphere stands free on the open square of stone paving, clear of both walls and of the pergola, with the border wrapping behind it. Two I-029 openwork vase sculptures stand at the border edge, smaller and further back. Two B-033 planters sit against the rendered wall, clearly secondary.
Application visualisations built from real catalogue models. These are not delivered project references.
Project quotation
Request a quote for model I-029
Tell us whether you need this existing catalogue model, a custom design requiring a new production mould, or help choosing the right route. Include your quantity, destination country and project requirements.
Request a Project Quote